Findings

Base metal brooch back, 32mm long. Contains 2 holes to wire wrap pieces into, with a hook type catch on the back, sold per piece. Available in gold only.

Base metal brooch back, 32mm long. Contains 3 holes to wire wrap pieces into and a round safety clasp to secure to your clothing, sold per piece. Available in nickel only.

Use these brooch bases to create your own brooch pin accessory by gluing, wire-wrapping or attaching beads with jump rings. These brooch backs are made from base metal (iron) and are approximately 30mm long x 6mm wide (with a depth of approximately 6mm...

Base metal brooch/clip back, contains a solid saucer base on front (suitable for gluing flowers/large beads etc onto), and a brooch pin and small alligator clip on the back. Saucer is 30mm wide, alligator clip is 45mm long, pin is 25mm long. Sold per...

Plain sterling silver ball (2mm diameter), commonly used to complement semi-precious or glass beads on special jewellery pieces. Sold per piece (minimum purchase applies).

Plain sterling silver ball bead, commonly used to complement semi-precious or glass beads on special jewellery pieces. These beads are hollow, with a join line visible down one side. Size is approximately 2.5mm x 2.8mm. The hole size is small,...

Decorative thin filigree sterling silver bead cap, size: 5.7mm x 5.7mm x 0.6mm. Is placed either side of a bead to give it a bit of decoration. Sold per piece (minimum purchase applies).

50mm long base metal head pins, used to create drops on necklaces or earrings, available in dark silver colour only. These pins are a quite thick (approximately 0.8mm thick, approximately 2.1mm flat head end), making them not suitable for beads with a...

Also known as screw clasps, barrel clasps twist open to complete a necklace or a bracelet. Join to your jewellery using the loops on both sides of the clasp - we recommend using a jump ring between the tigertail and the clasp. Available in bright silver...

An essential component for making beaded jewellery, headpins are used to create drops on necklaces and earrings. These headpins have a flat base, and the longer length of them allows them to be used for various sizes of drops/earrings - simply cut down...

50mm stainless steel ball pins, used to create drops on necklaces or earrings, available in dark silver (nickel) colour only. These pins are quite thick (approximately 0.7mm thick, with a 1.9mm ball head), so they work well for most beads except...

Bulk pack of base metal twist connector bars - these bars are curved, with a strong twist and have a small hole either end. Length: 15mm, width: approximately 1.2mm. Hole width is reasonably small, approximately 0.6mm. Available in bright gold colour...

50 piece pack of base metal twist connector bars - these bars are curved, with a strong twist and have a small hole either end. Length: 15mm, width: approximately 1.2mm. Hole width is reasonably small, approximately 0.6mm. Available in bright silver or...

22mm short base metal head pins, used to create drops on necklaces or earrings, available in black, bronze or copper. These short pins are quite thick (approximately 0.8mm thick, approximately 2.1mm flat head end), making them not suitable for beads with...

1 pair of plain 925 sterling silver ear wires (no ball), length: approximately 16mm (from bottom of loop to top of hook), width: approximately 25mm (from back of earwire to end). Diametre of loop on bottom of ear wires is 2mm. Sterling silver ear wires...

45mm long base metal head pins, used to create drops on necklaces or earrings, available in dark silver colour only. These pins are a reasonable thickness (approximately 0.75mm thick, approximately 1.8-2mm flat head end), making them suitable for most...

26mm short base metal head pins, used to create drops on necklaces or earrings, available in bright gold or dark silver. These short pins are a reasonable thickness (approximately 0.75mm thick, approximately Xmm flat head end), making them suitable for...

51mm long base metal head pins, used to create drops on necklaces or earrings, available in dark silver colour only. These pins are a reasonable thickness (approximately 0.75mm thick, approximately 2.1mm flat head end), making them suitable for most...

63mm long base metal head pins, used to create drops on necklaces or earrings, available in bright gold, bronze or copper. These pins are quite thick (approximately 0.8mm thick, approximately 2.1mm flat head end), making them not suitable for beads with...

70mm long base metal head pins, used to create drops on necklaces or earrings, available in bright gold colour only. These pins are quite thick (approximately 0.8mm thick, approximately 2.2mm flat head end), making them not suitable for beads with...

70mm long base metal head pins, used to create drops on necklaces or earrings, available in bright gold or dark silver. These pins are a reasonable thickness (approximately 0.75mm thick, approximately 1.6-1.7mm flat head end), making them suitable for...

110mm long base metal head pins, used to create drops on necklaces or earrings, available in bright gold colour only. These extra long pins are an average thickness (approximately 0.7mm thick, approximately 2mm flat head end), making them suitable for...

110mm long base metal head pins, used to create drops on necklaces or earrings, available in bright gold colour only. These extra long pins are very thick (approximately 1.0mm thick, approximately 2.1mm flat head end), making them not suitable for beads...

Fine sterling silver ball pin, length: 51.5mm, thickness: approximately 0.4mm (thin), thickness of ball/head: approximately 1.5mm. Sold per piece (minimum purchase applies).

Eye pins are used as components to created beaded chains - great for earrings and longer link necklaces. Simply thread on a bead, leave a gap of 10mm and cut the excess off the eye pin. Make a loop, then join to the rest of your creation. These short...

220 gram bulk pack of 50mm long base metal eye pins, thickness: 0.6mm, not suitable for semi precious beads. Note that these eye pins have not been individually straightened like our smaller retail packs - although little or no effort is required to...

50mm long base metal eye pins, thickness: 0.6mm (perfect for most gemstone beads), available in bright gold, copper, bronze or black. Sold per 22 gram packs, containing approximately 160 pins.

50mm long base metal eye pins, thickness: 0.7mm, available in bright silver or bright gold. 22 gram pack contains approximately 110 pins.

Eye pins are used as components to created beaded chains - great for earrings and longer link necklaces. Simply thread on a bead, leave a gap of 10mm and cut the excess off the eye pin. Make a loop, then join to the rest of your creation. These base...

Eye pins are used as components to created beaded chains - great for earrings and longer link necklaces. Simply thread on a bead, leave a gap of 10mm and cut the excess off the eye pin. Make a loop, then join to the rest of your creation. These base...

Small sterling silver 925 lobster clasp, length: 8mm (10.5mm including attached jump ring), width: 4mm. Sterling silver findings are useful when creating a special gift, or for people with sensitive skin, as few people are allergic to sterling...

1 large base metal pinch bail, available in bright gold. Bails are attached to pendants to allow them to be strung up into necklaces and so forth. Length: 27mm (including small bail at top used to string onto necklace etc, length of small bail at top:...

Pack of 2 large base metal clasps, mainly used to attach 'dangles' to bags, belts and other accessories. Available in bright silver or bright gold. Length: 21.2mm.

Bulk pack of large base metal clasp, mainly used to attach 'dangles' to bags, belts and other accessories. Available in gold only. Length: 21.2mm. BULK pack contains approximately 100 pieces.

1 large base metal pinch bail, length: 15mm, width: 11mm (not squished), thickness: 2.5mm. Bails are attached to pendants to allow them to be strung up into necklaces and so forth. Available in dark silver (nickel) colour only.

Also known as trigger clasps, parrot clasps are used in conjunction with jump rings to finish off a necklace or a bracelet. One side of the jewellery will have a parrot clasp - the other side has the jump ring that the clasp hooks into. These parrot...

Also known as trigger clasps, parrot clasps are used in conjunction with jump rings to finish off a necklace or a bracelet. One side of the jewellery will have a parrot clasp - the other side has the jump ring that the clasp hooks into. These parrot...

Base metal self closing hook clasp used to do up necklaces and bracelets, available in bright gold or black (gunmetal). Size is approximately 14mm x 5mm x 3mm. Bulk pack contains approximately 250 pieces.

Base metal self closing hook clasp used to do up necklaces and bracelets, available in bright gold, black or bronze. Size is approximately 14mm x 5mm x 3mm. Pack contains 25 pieces.

Standard stainless steel clasp used to do up most necklaces and bracelets, size is approximately 11mm x 7mm x 3.5mm. Sold per piece. Stainless steel is an alloy that is mainly comprised of iron, with the addition of chromium. People who suffer from...