Making your own scarf jewellery is simple by following our free and easy beading instructions! Working with a thin scarf, we will be wrapping wire around the end of the scarf to add dangles.
- 1 eye pin
- 5 large aluminium flattened ball metal beads
- 4 x 6mm strong jump rings
- 1 x open heart charm
- 1 pressed filigree metal heart pendant
- 1 thin scarf
- 2 x 15cm 20gauge beading wire
- 2 bead pin pendant bases
- 2 x 10mm plain metal beads
- 2 x 6mm plain metal beads
- Crimping Pliers
- Twirly Wirlie Pliers
- Wire Cutters
Pick up an eye pin and thread on one of the large aluminium flattened ball metal beads. Leaving a space of 10mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies.
Open up one of the 6mm strong jump rings and thread it onto the top loop in the flattened ball eye pin. Whilst it is still open, thread it onto the open heart charm and then close securely.
Open up another of the 6mm strong jump rings and thread it onto the bottom loop in the flattened ball eye pin. Whilst it is still open, thread on the pressed filigree metal heart pendant and then close securely.
Pick up your scarf and thread the open heart metal charm with all of its attachments into the centre. Put aside for now.
Pick up one of the large aluminium flattened ball metal beads and cut out the top "star" of metal. You will need to use strong cutters and be careful of the sharp wire. Take one of the ends of the scarf and fold into a point. Wrap a section of thick wire securely around the point and then pass the wire through the inside of the cut flattened metal bead and out through the hole in the bottom. Leaving a space of 10mm, cut the excess off the wire. Twirl the end using your twirly wirlies. Repeat this process with the other end of the scarf.
Pick up one of the bead pins, unscrew the top and thread on:
- a large aluminium flattened ball metal bead
- a 10mm plain metal bead
- a 6mm plain metal bead
Screw the top back onto the bead pin. Open up another 6mm strong jump ring and thread on the bead pin. Whilst it is still open, thread it onto the bottom loop on one end of the scarf. Close securely. Repeat the process of making the bead pin, and attach to the other end of the scarf. Your beaded scarf is now ready to wear!
© www.eurekabeads.com.au These free beading instructions may be used for personal use only [EX30631 EX99701]