Pink and Aqua Swarovski Scarf Jewellery: Project Instructions

Pink and Aqua Swarovski Scarf Jewellery: Project Instructions

Posted by Eureka! Beads on 29th Mar 2019

Follow our free beading instructions to make your own Scarf Jewellery. Featuring Swarovski crystal beads This project turns a looped scarf into a sparkling fashion accessory.

MATERIALS REQUIRED

  • 9 x 50mm eye pins
  • 4 x 6mm rose Swarovski bicones
  • 4 x 6mm aquamarine Swarovski bicones
  • 4 x 6mm crystal AB Swarovski bicones
  • 3 x 50mm head pins
  • 12 x 6mm strong jump rings
  • 1 x 8mm jump ring
  • 1 scarf clip

TOOLS REQUIRED

  • Twirly Wirlie Pliers
  • 2 x Crimping Pliers
  • Wire Cutters

INSTRUCTIONS

The Components

Pick up one of the eye pins and thread on a 6mm rose Swarovski bicone bead. Leaving a space of 10 mm, cut the excess off the eye pin. Twirl the end using your twirly wirlies. Repeat process until you have 3 rose Swarovski eye pin components, 3 aquamarine Swarovski eye pin components and 3 clear AB Swarovski eye pin components. Put aside.



Pick up one of the head pins and thread on one Swarovski rose crystal bead.
 Leaving a space of 10mm, cut the excess off the head pin. Twirl the end using your twirly wirlies. Repeat process so that you also have one aquamarine head pin component and one clear AB headpin component.

Putting it together

You will be making 3 small chains of Swarovski crystal.

To make the first chain, open a 6mm jump ring and thread on the rose Swarovski headpin component and a clear AB eye pin component. Close securely.

Open another 6mm jump ring, and join the clear AB eye pin component to an aquamarine eye pin component. Close securely.

Open another 6mm jump ring and join the aquamarine eye pin component to a rose eye pin component. Close securely.

Open another 6 mm jump ring and connect to the top of the rose Swarovski components and close securely. Put this chain aside.

To make the second chain:

Open a 6mm jump ring and thread on a clear AB headpin component and an aquamarine eye pin component. Close securely.

Open another jump ring and connect the aquamarine eye pin component to a rose eye pin component. Close securely

Open another 6mm jump ring and connect the rose eye pin component to a clear AB component. Close securely

Open another jump ring and connect to the top of the Clear AB component, close securely and put aside.

To make the third chain:

Open a 6mm jump ring and thread on the aquamarine head pin component and a rose eye pin component. Close securely.

Open another 6mm jump ring and connect the rose eye pin component to the clear AB eye pin component. Close securely.

Open another jump ring and connect the clear AB component to an aquamarine component. Close securely.

Open the last 6mm jump ring and connect to the top of the aquamarine eye pin component.

Open the 8 mm jump ring and connect the three chain together then close securely. Thread the 8mm jump ring onto the large opening scarf ring.

Open the large scarf ring and clip securely over your looped scarf.

© www.eurekabeads.com.au These free beading instructions may be used for personal use only [EX45691 EX99691]