Simple Black/Silver Necklace: Project Instructions

Featuring black and silver lampwork glass beads, this necklace is quick and easy to string up, using tigertail, jump rings and crimps. Use our project instructions to find out how.

MATERIALS REQUIRED

65cm tigertail
1 plain circle toggle clasp
4 x 6mm strong jump rings
1 head pin
2 filigree metal tubes
26 flat silver lined metal beads
24 black 6mm glass bicone crystals
2 small tube crimps

TOOLS REQUIRED

Twirly Wirlie Pliers
Wire Cutters
Crimping Pliers

INSTRUCTIONS
Main part of necklace
Thread a small crimp, followed by a jump ring, onto your tigertail. Thread the tigertail back through the crimp, pull up tightly and squish the crimp down. Cut off any excess tigertail. Thread on one of the filigree metal tubes. Next, thread on:
- a flat silver lined glass bead
- a 6mm bicone glass crystal

Repeat pattern another 23 times, until you have 24 flat silver lined glass beads on your strand. Thread one more flat silver lined glass bead on, and finish with a filigree metal tube. Thread a small crimp, followed by a jump ring, onto your tigertail. Thread the tigertail back through the crimp, pull up tightly and squish the crimp down. Cut off any excess tigertail.

On one end of the strand, open up the attached jump ring, thread on the circle part of the toggle clasp (thread through the loop at the top of the circle) and close the jump ring securely.

Open up another jump ring and attach to the jump ring on the other end of the strand. While it's still open, thread on the bar part of the toggle clasp. Close securely.

The drop
Take a head pin and thread on:
- a plain metal bead
- a flat silver lined glass bead
- a plain metal bead
Leaving a space of 10mm, cut the excess off the head pin. Twirl the end using your twirly wirlies.

Putting it together
Open up another jump ring, whilst it is open, thread on:
- the drop
- the circle part of the toggle clasp (thread through the actual circle).
Close securely. Your necklace is now complete and ready to wear.