Miscellaneous Findings

50 piece pack of horseshoe shaped base metal wire protectors - use these guards to protect your stringing materials from rubbing up against metal components. Often used as an alternative to french wire. Inner diametre: approximately 0.8mm, height: 5mm,...

Bulk pack of horseshoe shaped base metal wire protectors - use these guards to protect your stringing materials from rubbing up against metal components. Often used as an alternative to french wire. Inner diametre: approximately 0.8mm, height: 5mm,...

Bulk pack of black cord attached to a silver finding, used to make mobile phone 'danglers'. Simple attach your beads (using tigertail, chain or elastic) to the small hole in the top of the finding part, and attach the black cord to your phone. Also...

Black cord attached to a silver finding, used to make mobile phone 'danglers'. Simple attach your beads (using tigertail, chain or elastic) to the small hole in the top of the finding part, and attach the black cord to your phone. Also useful for making...

Plastic headphone jacks, used to make mobile phone 'danglers'. Simply attach your beads (using tigertail, chain or elastic) to the small hole in the top, and plug the other end into the headphone jack on your phone. Available in black only. Length of...

Black rubber with a spring in the middle to form a figure eight, used to make eye glass chains. Attach an eye glass holder to either side of your string of beads (using tigertail or chain) and hook the other side of the eye glass holder onto your glasses...

Plastic headband, 3mm x 10mm thick, approximately 12cm wide, colour is a grey/black with a whispy grey patterning. These versatile headbands are lightweight and can be covered with ribbons, laces and beads. Sold per piece.

Base metal silver hairclip, with plenty of sparkling diamantes throughout. Hair piece has three diamond shaped pieces in the middle, perfect for hanging beaded pieces off. Great for wedding, debutante and bridal jewellery. Length: 75mm, width: 15mm,...

Base metal kilt pin, available in bright gold, black, bronze or copper. Length is 65mm and pin has three small loops (diametre: 2mm) to attach charms and beads. These kilt pins are quite sturdy - the main wire is approximately 1.5mm thick. BULK packs...

Base metal kilt pin, available in bright gold, black, bronze or copper. Length is 65mm and pin has three small loops (diametre: 2mm) to attach charms and beads. These kilt pins are quite sturdy - the main wire is approximately 1.5mm thick.

Large base metal kilt pin, available in bright silver only. Length is 78mm and pin has three small loops (diametre: 3mm) to attach charms and beads.

Base metal kilt pin, available in bright gold, bronze or copper. Length is 60mm and pin has three small loops (diametre: 3mm) to attach charms and beads.

Base metal kilt pin, available in bright gold only, length is 60mm, thickness of pin is approximately 1.2mm. These useful pins have one end that screws off - allowing beads and charms to be threaded on. Once you're happy with your design, you can twist...

Base metal brooch back, 32mm long. Contains 2 holes to wire wrap pieces into, with a hook type catch on the back, sold per piece. Available in gold only.

Base metal brooch back, 32mm long. Contains 3 holes to wire wrap pieces into and a round safety clasp to secure to your clothing, sold per piece. Available in nickel only.

Base metal brooch/clip back, contains a solid saucer base on front (suitable for gluing flowers/large beads etc onto), and a brooch pin and small alligator clip on the back. Saucer is 30mm wide, alligator clip is 45mm long, pin is 25mm long. Sold per...

Bulk pack of base metal twist connector bars - these bars are curved, with a strong twist and have a small hole either end. Length: 15mm, width: approximately 1.2mm. Hole width is reasonably small, approximately 0.6mm. Available in bright silver or...

50 piece pack of base metal twist connector bars - these bars are curved, with a strong twist and have a small hole either end. Length: 15mm, width: approximately 1.2mm. Hole width is reasonably small, approximately 0.6mm. Available in bright silver or...

Hardened metal bow, made from a metal mesh with a small base metal centre. The centre piece has a hole on either side, allowing it to be used as a connector in jewellery pieces, looks great made into earrings. Size varies slightly from piece to piece,...

2 piece pack of large base metal split rings, mainly used as a keyring to attach 'dangles' to bags, belts and other accessories. Available in bronze or dark silver (nickel). Diametre: 27mm

Large saucer base, diametre: 24.5mm, number of holes: 37. Saucer can be used to wire small beads and crystals onto, to create a unique beaded piece. Bead this piece into a brooch back or into a necklace to create your own special jewellery. Available in...

1 small saucer base metal ring base, ring diametre: 19mm (size is adjustable), diametre of saucer: 17.5mm. Ring has a 'saucer' on top that can be used to wire small beads and crystals onto, to create a unique beaded ring. Sold per piece, available in...

1 base metal ring base, diametre: 18.5mm (size is adjustable). There are two sets of 5 rings to hang dangles off (i.e. 10 small rings), available in bright silver or bright gold, sold per piece. To make a 'dangle ring', simply hang small charms and beads...

1 base metal ring base, ring diametre: 19mm (size is adjustable), diametre of flat base: 12mm. Ring has a flat base on top that can be used to glue cabochons and flat back pieces onto, to create a unique beaded ring. Available in silver only, sold per...

Plain base metal bookmark - length 85mm, length of 'hook' segment: 10mm. Contains a loop in the hook part of the bookmark to hang beads from. Available in bright silver or bright gold, sold per piece. To make a bookmark: simply take a piece of tigertail,...

Fancy base metal bookmark - length 124mm, length of 'hook': 24mm. This bookmark is quite ornate, with stars, moons, rainbows, suns and more. Contains a loop in the hook part of the bookmark to hang beads from. Available in gold, copper or bronze, sold...

Large saucer brooch, diametre of saucer: 26mm. Brooch has a 'saucer' on top that can be used to wire small beads and crystals onto, to create a unique brooch. Sold per piece, available in bright gold only.

Base metal shoe clips, each clip has a saucer disc with holes, suitable for wire wrapping beads onto. Diameter of saucer: 15mm, width (at widest point): 8.5mm. Can also be used as clip on earrings. Available in bright silver or bright gold. Sold per...

Pack of 5 base metal ball chain connector ends, suitable for 2mm ball chain. Approximately 8mm long x 3mm wide. Available in bright silver, bright gold, black (gunmetal), bronze, copper or dark silver (nickel). Use these connector ends as a clasp with...

Base metal backed round diamante, available in purple, clear, amber, clear AB, teal (teal-blue) or green AB (looks similar to crystal vitrail). Base metal backing is silver toned. The glass crystal is a pointed back, giving a brilliant shine, piece is...

Base metal backed round diamante, available in purple, clear, amber, clear AB, teal (teal-blue) or green AB (looks similar to crystal vitrail). Base metal backing is silver toned. The glass crystal is a pointed back, giving a brilliant shine, piece is...

Base metal backed teardrop diamante, available in purple, clear, amber, clear AB, teal (teal-blue) or green AB (looks similar to crystal vitrail). Base metal backing is silver toned. Crystal is a pointed back, giving a brilliant shine, piece is 18mm tall...

Base metal wire frame with 6 points, suitable for beading up into a snowflake, each 'arm' is approximately 4.75cm long, 0.8mm thick, available in nickel only. Great for Christmas, sold in an 8 piece pack. Instructions for basic snowflake design: Add...

Base metal chain tassel, overall length of piece: 70mm, width of cap: 10mm. Tassel has a loop at the top to join to your creations, and 12 chain dangles. Links in the chain are approximately 4mm long, so great for adding more beads or charms. Sold per...

Polyester satin tassel, overall length of piece: approx 13cm (length does vary from colour to colour, from about 10cm to 15cm). Tassel has a loop at the top to join to your creations, and lots of string dangles. Very soft silky feel. Sold per piece...

Base metal extender chain, overall length of chain: approximately 50mm (60mm including charm). These small lengths of chain are perfect to add a bit of length to a necklace or bracelet, so that the wearer can decide on the exact fit that they want. Comes...

Pack of fine tag ends, approximately 6.5mm tall x 2.5mm wide x 0.5mm thick. These tag ends can be used at the end of a necklace to attach the parrot clasp. With a smaller hole (approx 1mm diameter) on top and a larger hole on the bottom (approx 2.5mm...

Pack of fine teardrop chain ends, approximately 7mm tall x 3.5mm wide x 3.5mm thick. These chain ends can be used at the end of an extender chain on a bracelet or necklace to give it a more elegant look. Simply attach a small length of chain to the end...

Extra large base metal square ring, mainly used to add feature segments to chain. Ring is solid - you will need to use small jump rings to attach this to other pieces. Available in antique silver. Outer diameter (ID): approximately 17mm, inner diameter...

Bulk pack of base metal shiny metal haircomb, beading wire can be used to wrap beads and crystals in place, creating a unique hairpiece. Length: 80mm, width: 40mm, thickness: 0.6mm. Available in bright silver or bright gold. BULK pack contains...